14
Protected Area, is a partition on the hard drive that is not normally visible to an
operating system.
Tap
the ‘ENT’ button to change this option’s setting.
[ ]
– DCO Check is disabled (default). The system will not check for DC
partitions.
[
٭
]
– DCO Check is enabled. When DCO CHECK is enabled the duplicator
will support DCO partition. When you duplicate a Master Flash that contains
DCO, the system will detect the DCO partition, unlock it, copy the area and
then re-lock the area once duplication is complete.
9.14
CHECK SUM CHECK
CHECK SUM CHECK is used to generate a CRC code between Master and
Target(s) after copy process completed.
CHECK SUM CHECK is able to work with the FULL or BRIEF copy at the same
time. It will not take extra time to do it.
If you want to check the CRC of the Source/Target(s), Hold ENT KEY one more
second and navigate UP/ DOWN to check each hard drive.
9.15
SET SMART CHECK
S.M.A.R.T.(Self Monitoring Analysis and Reporting Technology) is a monitoring
system in hard disk drives and solid-state drives that detects and reports on
various indicators of drive reliability.
S
→
123456789AB
VVVVVVVVVV
SOURCE CHECK SUM :
0x19ECD646
TARGET 01 CHECK SUM
0x19ECD646
S
→
123456789AB
MMMMMMMM
1th Page.
V for Successful.
X for Failed.
2th page Error Code :
“
M
”，
M
for copy successful.
Tap Up/Down key to
check all targets’ CRC.
Tap ESC back to the
previous menu.
