12
9.8
OPTIMIZE LOG TAB
It allowed to optimize log table and make the copy more effective.
9.9
SET DOD ERASE
9.9.1
[000]ERS DOD CYCLES
ERASE deletes all information on any connected Target flash drives by writing
zeros and /or specific patter into each sector of the flash drive, sector by sector.
When enabled “ SET DOD ERASE”, the function name will be replaced from
ERASE to ErsDOD on the main operation manual.
9.10
SKIP READ ERROR
The SKIP READ ERROR option allows you to enable or disable error skipping
during FULL, BRIEF and RESIZE modes.
Tap
the ‘ENT’ button to change
this option.
[ ]
– Disabled (default). When an error is detected while reading from the
Source, the duplicator will cancel the current process.
[
٭
]
– Enabled. When an error is detected while reading from the Source, the
duplicator will skip the bad sector on the Source and fill it with a zero on the
Target.
。
DOD ERASE, Cycle
times.
[ErsDOD] X003
[ErsDOD] 11 / [WRT0] 003
Total FLASH Devices.
DOD ERASE Steps (1) WRT:00, (2) WRT:FF, (3)
WRT:RM, (4)WRT:REVEY
