CopperOptics 150-1218-02, Руководство пользователя

Страница: 10 / 19

Section 150-612-100
Revision 02
Page 10
10.09 All of the HRU loopbacks towards the
network (NREM & SMJK) are metallic/logic
(AIS/ENA) or metallic only (AIS/DIS) except for
the TLOS initiated loopback, which is logic only.
The SMJK identifying label indicates that the
loopback was initiated by the 3 in 5 in band
command. NREM is used to indicate that the
metallic loopback was initiated by other than the
3 in 5 command (3 in 7, 16 bit addressable
repeater commands or front panel push-button).
C. INSTALLATION AND TEST
11. INSTALLATION
11.01 Upon receipt of the equipment, visually
inspect it for signs of damage. If the
equipment has been damaged in transit, immediately
report the extent of damage to the transportation
company and to PairGain.
11.02 The HRU-612, List 1 is designed to mount in
PairGain’s HRE-421 (double width, single
mount), HRE-422 (double width, double mount),
HRE-424 (double width, 4 unit wall mount), HRE-420
(single width, single mount) or HRE-425 (10 unit wall
or rack mount) Remote indoor Enclosures. For
outdoor applications, the HRE-423 (3 unit) and HRE-
450 (single width, single mount) enclosures are
available. The HRU is also compatible with industry
standard 400 type multi-mount shelves. The HRU’s
pin-outs are shown in Figure 6.
Figure 6. HRU-612 Pin-outs.