background image

Condensing Unit Controller EC2-5X1 

English 

French 

German 

 

 

 

 

 

1 Safety 

Instructions 

1.1 

Icon explanation  

WARNING 

This Icon indicates instructions to avoid heavy personnel injuries and heavy material 
damage.  
 

High Voltage  

This icon indicates operations with a danger of an electric shock. 
 

Danger of burning or frostbite  

This icon indicates operations with a danger of burning or frostbite. 
 

Explosion Hazard  

This Icon indicates operations with a danger of explosion. 
 

CAUTION  

This Icon indicates instructions to avoid property damage without or with low personnel 
injuries.  
 

IMPORTANT 

This icon indicates instructions to avoid malfunction of the compressor.  
 

NOTE

  this word indicates a recommendation for easier operations. 

 

1.2 Safety 

statements 

 

Only qualified and authorised refrigeration personnel are allowed to do the 
installation, commissioning and maintenance. 

 

Qualified electrical personnel must connect the condensing unit and its 
accessories. 

 

All valid standards for connecting electrical and refrigeration equipment must be 
observed. 

C6.1.3/0505-0705/E 

Part no: 3125495 

Содержание EazyCool EC2-5X1























Отзывы: