background image

 
 
 
 
 
 
 
 
 

• 

Insert a 

barrel nut

 into each of the headboard brace. The hash mark on the front of the nut should be aligned 

vertically.

 

• 

Insert the 

3” Allen Bolts 

through the underside of the deck and into the barrel nuts. Fully tighten each bolt 

with the Allen Wrench.

 

• 

Once the braces are in place, retighten the four bolts on the back of the headboard panel.

 

• 

For the split headboard version, repeat Steps 5 and 6 for the other headboard assembly. 

 

 

Headboard Assembly - Solid or Split Headboards 

Brace 

       

 

  Astrid Bed - 

assembly instructions 

 

    Step 5

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
  Step 6

 

 

 

 
 
 
 

 
 
 

 
 
 
 

 
 
 

 
 

 
 
 
 
 
 

 
 

 
 
 
 
 
 
 

 

www.copelandfurniture.com

 

 

• 

Slightly loosen all Allen bolts on the back of the 

headboard 

assembly(s)

. Bolts must be loose before proceeding. 

• 

Insert the vertical headboard 

braces 

onto the pockets of the 

deck. This will be a snug fit.  

 
 
 

 

3” Allen Bolts x4 

 
 
 
 

 

 

Barrel Nuts x4 

 
 
 

 

 

 

 
 
 
 
 
 

Note on Split Headboard Version: To preserve visual 

continuity of the wood grain, the panels of the Split 

Headboard version have been cut from a single larger 

panel. Each of the two headboard assemblies has a 

mark on the bottom of one of the vertical braces. For 

each assembly, the brace with the mark should be 

positioned toward the center of the bed.  

Brace with Mark –

toward center of bed 

Содержание Astrid






Отзывы: