Astrid Bed -
assembly instructions
Step 2
Attach the base assemblies with the two
joining plates
and
four 1 1/2” Allen bolts
per each plate using the provided
Allen wrench.
Hint - use the adjustable feet on the center support legs to align the height of the two base units. After
the base units are joined, retract the adjustable feet slightly so that they only make contact with the floor when weight is
applied to the fully assembled bed.
Step 3
Position the
two deck assemblies on top of the
base
, aligning the hole patterns of the deck with
those of the base.
Note - the base assembly has no specific headboard
or footboard ends.
Step 4
If you have purchased an Astrid platform bed with no headboard, assembly is complete. If your bed includes a
headboard then proceed to step five.
2” Allen Bolt x8
•
Insert the
2” Allen bolts
in each of the eight
corner locations. Do not fully tighten bolts.
•
Insert the 28 remaining 1 1/2” Allen Bolts in the
remaining locations. Again, do not fully tighten.
•
After all bolts have been started use the Allen
wrench to fully tighten all 36 locations.
Note: wood is a natural material and prone to slight
movements over time. Certain parts may require some
minor flexing to begin the bolts. This is normal and to
be expected.
1 1/2” Allen Bolt x36
Joining Plate x2
Adjustable Feet
Corner Locations