46
Chapter IV DOME Installation Description
4.1 Safety measures
4.1.1 Qualification of installation or maintenance workers
Submission of qualification certificate for CCTV system install or maintenance, and qualification certificates for relevant works (such as high altitude
operations etc), these workers must have the following elementary knowledge and skills;
Elementary knowledge for CCTV system and components and skills for installing;
Elementary knowledge for LV wiring and LV electronic circuit wiring and operating skills;
Able to read and understand this manual.
4.1.2 Requirements for lifting equipment
Using the safe lifting equipment suitable for site conditions and pan/tilt mounting mode;
The lifting equipment must have the enough lifting height for reaching the specified position for installing purpose;
The lifting equipment must have the excellent safety performances.
4.2 Warning
Forbid to install and operate this product at the dangerous area for storing or using the flammables or explosives.
During the installation and operation of this product, strictly obey all national and local electrical safety codes.
Confirm that the nearby touchable fixtures and this product have been powered off.
The applicable voltage of this product is DC12V(vehicle-mounted) or AC24V(normal DOME),strictly forbid to apply the voltage higher than the required
directly upon this product.
This product is forbidden to install at the place beyond the specified service conditions.
In this manual, the DC12.V(vehicle-mounted),AC24V(normal DOME), are generally called the power cable, and RS485 cables are briefly called the
communication cable, and BNC video coaxial cables are briefly called the video cable.
4.3 Ambient requirements
Temperature
：
-35
～
55 Humidity
：
90
％
Power standard
：
AC24V/2.5A
