19
4
5
2.5.1 DOME control
After open preview image, each key in the right of interface means:
①
Speed key Setup DOME totate speed.
②
Direction
key
Control DOME”up,top left,top right,down,left bottom,right bottom,right,left. Click
icon,can call OSD menu
③
Zoom
Change lens zoom(invalid for auto Zoom camer)
④
Focal
Change lens’ focus (invalid for auto focus camer)
⑤
IRIS
Change Lens’s IRIS (invalid for auto IRIS camer)
Preset
1. In preset box choose preset No. Trough[2nd key]to adjust camera position,click“
”
will save current preview point. If need customize other reset,pleaes re-done Setp 1.
2.Call back preset:In prset box choose preset No.Click“
” can access seted preset
⑦
Scan
Scan means DOME constant speed in a clockwise from left limit point to the right limit
point,setup step as below:
1. Through adjust camera to desired point,click “
” can set left limit point. Pan move
DOME to 2
nd
position, click“
” can set right limit point&scan speed
2. After operate,click“
” can call back scaning line.
⑧
Patrol
Patrol is a path for camera, through multiple serial number cruise points,patrol setup as
below:
1. Setup patrol point 1,in display box, choose patrol No.click“
”,go into patrol point
editcontain: title,preset,stop time,and patrol speed.
Re-operate 1
st
step,to setup other patrol point. After operate, click“
” can callback
patrol line.
Pattern
Pattern used to recode camera running line.Pattern setup as below:
1. Click“
”,start into pattern setup
2. Operate DOME kinds of control
。
3. After operate, re-click“
” can finish setup.
Search pattern: Click“
” start run pattern.
1
2
3
6
7
8
9
