COP Security XT Series, Руководство пользователя

Страница: 24 / 70

24
3-3-3. SETUP-REC-EVENT REC
This Sub-Menu selects the settings for the Alarm and Motion Recording options.
If these settings trigger an event, the DVR will record at the Recording Rate, Resolution and Quality
set in the [REC PROPERTY] Sub-Menu, and for the duration set in the [REC EVENT – OPTIONS]
Sub-Menu. It will record the event even if the REC button has not been pressed.
1) Highlight [EVENT REC] using (
▲
)(
▼
)buttons, and press the [ENTER] button to enter the Sub-menu.
MOTION DETECTION
From this Sub-Menu the Detection Area (Masking) and Sensitivity settings can be selected.
1) Highlight [MOTION DETECTION] using (
▲
)(
▼
)buttons, and press [ENTER] button to enter.
2) Using the Cursor Buttons, highlight the [SEN] adjacent to the camera to be adjusted, then change
the sensitivity by using the number buttons (0 is the least sensitive and 9 is the most sensitive).
To save this change press [ENTER].
(Note: If [OFF] is displayed, select Area before Sensitivity)
3) Use the Cursor Buttons to highlight the [AREA] adjacent to the camera to be adjusted.
4) Press [ENTER] to show the Motion Detection Area
setup window.
5) If NO masking is to be used, Use Cursor &
ENTER buttons to select [ALL]
6) If masking IS to be used, Use Cursor & ENTER
buttons to select [PART]
7) Use the (
▲
)(
▼
)(
◀
)(
▶
) buttons to highlight a
detection segment, then press [ENTER] button to
toggle between Mask (CLEAR) or Detection (BLUE).
8) Press [MENU] button to exit the Sub-Menu.
[SETUP-REC]
- REC PROPERTY
- REC OPTION
- <EVENT REC>
- SCHEDULE REC
- DELETE REC
- LOCK / UNLOCK REC
- DELETE ALL REC
[SETUP-REC-EVENT]
- MOTION DETECTION
- SENSOR DETECTION
- OPTIONS
[SETUP-REC-EVENT REC(M/D)]
NUMBER SEN AREA
CH 01 0 <-OFF>
CH 02 0 -OFF
CH 03 0 -OFF
CH 04 0 -OFF
CH1
1 2 3 4 5 6 7 8
1
2
3
4
5
6
7
8
3. SETUP
[SETUP-REC-EVENT REC(M/D)]
NUMBER SEN AREA
CH 01 0 <-OFF>
CH 02 0 -OFF
CH 03 0 -OFF
CH 04 0 -OFF
AREA
- ALL
- PART
- OFF
- PART