Music Centre with DAB Radio
F985
Instructions for Use
Please read and retain these instructions for future reference
v002: 05/08/19
Page No. 4
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the mains voltage and before all other
connections have been made.
Do not cover any vents and make sure that there is a space of several centimetres around the unit for
ventilation.
Connection
1.
Connect the power cord (25) to AC outlet.
1)
Press the Power on/off/Function button (13) once and the LCD display (2) with blue backlight on.
2.
Then set the Function (13) to FM (Tuner) mode. If sound is coming out from the speaker, it means the
power supply is normal. Now your system is ready to play music.
Listening to DAB/FM radio
Getting started
-
Connect the DAB/FM antenna to the DAB/FM antenna socket (22) at the back of the unit and extend it
for the best reception
-
Press the Power on/off/Function button (13) to turn on the unit and press the button again to switch
the function to DAB/FM mode.
FM radio - Auto scan
1.
Switch the function to FM mode.
2.
Press the “scan” button (4) once, the unit will auto-search the nearest available FM station forward and
stop.
3.
Press the “scan” button again to auto-search to the next available FM station forward and stop.
4.
Press and hold the “scan” button for 2-3 seconds, the unit will auto-search the nearest available FM
station backward and stop.
5.
Adjust the volume knob (9) to the desired volume level.
FM radio - Manual tuning
1.
Turn the “Select/Enter” knob (3) to tune to the desired station manually.
2.
Adjust the volume knob (9) to the desired volume level.
FM & FM-Stereo reception
The unit will default to FM mode automatically. If the reception is strong, the FM signal will be