Music Centre with DAB Radio
F985
Instructions for Use
Please read and retain these instructions for future reference
v002: 05/08/19
Page No. 10
Slightly press the “Tape forward/eject“ button again to
resume normal playback. The “Tape forward/eject“ button
will revert to the highest position.
Remark
-
Make sure the direction is correct when inserting the tape into the system.
-
There is some searching noise in fast forward mode.
-
This is recommended to take out the cassette tape from the system after you
have finished listening and not to leave the cassette tape inside the system
when you are not playing it.
Phono
Remarks:
-
Remove the stylus protector.
-
Be sure that the tone arm is being detached from the tone arm
rest before operating and re-secured again afterwards.
1.
Press the Power on/off/Function button (13) to turn on the unit and press the button again to switch
the function to PHONO mode.
2.
Set the speed selector to the proper position depending on the record to be
played.
3.
Place the record on the platter (use the spindle adaptor if required).
4.
Lift the tone arm from the rest and slowly move it to the record side. The platter
will start to rotate.
5.
Place the tone arm to the desired position of the record.
6.
Adjust the volume (9) to the desired level.
7.
At the end of record, the platter will automatically stop rotating. Lift the tone arm from the record and
return it to the rest.
8.
To stop manually, lift the tone arm from the record and return it to the rest.
Remark
: For some records the auto-stop area is outside the unit’s setting. The record may stop before the
last track finishes. In this case, set the auto-stop switch (24) to the “off“ position and the record will play to
the end but will not stop automatically (turn off the unit by power button or switch back the auto-stop
switch to “on“ position to stop the platter rotate). Then put back the tone arm to the rest position.