Buddha Fountain with rotating Ball
H752
Instructions for Use
Please read and retain these instructions for future reference
v001: 23/04/21
•
When not in use, unplug the cord, pour the water out, and store neatly in a cool, dry location protected
from sunlight.
PREPARATION
Before beginning assembly of product, make sure all parts are present. (1 x Main body top and base, 1 x
pump). If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS
On first use, please allow 5 minutes on first use for water to transfer from the base through to the
fountain.
•
Carefully remove the product and accessories from package. Discard any fasteners, tags, or bags in
accordance with your local municipality regulations. Keep packaging for safe storage.
•
Place the product on a flat, stable surface close to a power source.
•
Make sure the water discharge end of the pump is inserted into the flexible tube on the main body of
the fountain (see photograph). There is a control apparatus on the pump t
o adjust the water flow, “
-
“
is weaker
water flow , and “+” is
stronger
. Make sure it is on the “
-
“position.
•
Unplug the pump transformer. Fill the base with fresh water and keep the fountain level (Please note
that the wire of the plug should be along with the slot on fountain). Please beware the pump must be
completely immersed in water!
•
Make sure the plug is dry and clean. Connect the plug to the power source to switch the pump on,
disconnect the plug to switch it off.
Step 1
Step 2