![background image](http://html1.mh-extra.com/html/coopers/10496/10496_instructions-for-use-manual_2665230010.webp)
Multi Music System
10496
Instructions for Use
Please read and retain these instructions for future reference
v001: 28/09/16
Page No 10
3.
Place the record on the turn table; use the 45 rpm adaptor if required.
4.
Push the LIFT LEVER upward to raise the tone arm from the arm rest, and then slowly move it to the
record side. The turn table will start to rotate.
5.
Push down the LIFT LEVER to drop the tone arm and touch the record gently. Phono playing starts now.
6.
Push the LIFT LEVER upward to raise the tone arm from the arm rest, the turntable will still be rotating but
phono playing will stop. To continue playing push down the LIFT LEVER.
7.
Adjust the volume to the desired level.
8.
At the end of the record, the turntable will automatically stop rotating. Push the LIFT LEVER upward to
raise the tone arm and manually move it to the arm rest, and then put down the LIFT LEVER.
9.
To stop manually, lift the tone arm from the record and return it to the arm rest.
REMARK
: If the record stops before the last track finishes, select the AUTO-STOP switch to “OFF“ position,
then it will run to the end of the record but will not stop automatically (turn off the unit by power button or
switch back the AUTO-STOP switch to “ ON “ position to stop the turntable rotate). Then put back the tone
arm to the arm rest.
PHONO ENCODING (Fig. 1)
1.
Press the FUNCTION button to select “PHON” on display and then insert memory device (USB drive, SD or
MMC card).
2.
Press the “REC” button, it will take 3-5 seconds to read the memory device. The USB icon will be flashing.
3.
Press the SKIP UP
button or SKIP DOWN
button to select desired mode (USB or SD) for
encoding. Then press the “REC” button again to confirm. The system starts encoding mode after a few
seconds.
4.
If only USB drive or SD/MMC card is inserted, step 3 can be skipped.
5.
The USB or SD icon will flash on the display during encoding.
6.
To finish encoding, press the STOP
button and display will show “END” and return to phono mode.
REMARKS:
-
The recording speed is 1:1 and according to the actual playing time of the record player.
-
The recording format is preset at – MP3 bit rate : 128 kbps
CASSETTE TAPE & ENCODING (Fig. 1 and 3)
1.
Press the FUNCTION button to select “TAPE” on display.
2.
After inserting the cassette tape, the system will start playing automatically.
3.
Adjust the volume to the desired level.
4.
Press the “TAPE FAST FORWARD / EJECT” button” at cassette player half way during playing, the tape will
be advanced forward rapidly.