Multi Music System
10496
Instructions for Use
Please read and retain these instructions for future reference
v001: 28/09/16
Page No 8
TIMER FUNCTION (automatic switch to standby) (Fig. 1)
1.
Push the POWER KNOB till the STANDBY INDICATOR light is off. Unit is turning from standby mode to
operation mode.
2.
When the unit is turned on, press the SLEEP button repeatedly to choose the sleep time minutes from
90>80>70…..>10 off.
3.
Sleep time setting is stored when the “SLEEP” icon lights up on the display.
4.
When the sleep time minutes are over, unit will be switched to standby mode automatically.
LISTENING TO RADIO
RADIO TUNING (Fig. 1)
1.
Press the FUNCTION button to select “TUNE” mode.
2.
Select the desired band by pressing the BAND button (AM or FM).
3.
Tune to the selected station by pressing the SKIP UP or SKIP DOWN button for 1-2 seconds, and then
release.
4.
The unit will start seeking automatically and stop when a radio station is found.
MANUAL PRESET RADIO STATIONS (Fig. 1)
1.
When the desired radio station is found, press MODE button, program number will be flashing.
2.
Press the PRESET UP or PRESET DOWN button to choose the program number for storing the desired radio
station.
3.
Press the MODE button again to confirm, program number will stop flashing.
4.
Repeat steps 2 & 3 until all desired radio stations have been found and stored.
5.
Press the PRESET UP or PRESET DOWN button to choose the preset radio stations.
6.
The number of stations that can be found and stored is dependent on the reception in different areas and
countries (FM: max 30 stations, AM: max 20 Stations)
AUTO PRESET RADIO STATIONS (Fig. 1)
1.
During radio mode, press the PLAY/PAUSE button, the unit will automatically scan the radio frequency.
When the clear signal is found, it will automatically store the radio station, starting from program number
1.
2.
The number of stations that can be found and stored is dependent on the reception in different areas and
countries. See Manual Preset Radio Stations point 6 above.
