2
1.
Remove all items from packaging and verify
that all parts are included as per list. The Steam
Cleaner has an accessory compartment that
houses all accessories which is located under
the main cover. You open this by pressing the
yellow button on the back of the Steam Cleaner
just above the wheels, lifting the unit handle upwards and then separating the top and bottom of the
unit.
2.
Connect the Steam Hose to the steam
cleaner as pictured. Pull down the yellow
cover that is over the nozzle hole on the
steamer and insert the steam hose using
the connector nozzle located on the end of
the steam hose. This should be securely in
place and you should hear a click. To remove the steam hose, press in both release buttons on either
side of the steam connector and pull from the socket. Do NOT remove steam hose whilst the
product is in use, allow to cool first
3.
Select the desired accessories based on the area you wish to steam clean and connect to the
steam cleaner. Each accessory can be used as follows;
Extension Tubes:
Assemble the extension
tubes if the steam cleaner is to be used to
clean floors or difficult to reach areas. You
can extend the steam hose by adding up to
all 3 of the extension tubes if required. To
attach the tubes, push the open end of the
tube into the steam gun until the release button, pictured above, clicks into place.
To remove the tubes, press in the release button and pull the tube downwards.
Assembly and Use:
Содержание 9283
Страница 9: ...9...
