Cordless Steam Iron
10987
Instructions for Use
Please read and retain these instructions for future reference
v001: 02/10/17
Never operate the iron with a damaged power cable or plug, or after it has been dropped or damaged in
any way. To avoid the risk of electric shock, do not disassemble the iron, take it to a qualified serviceman
for examination and repair.
Do not let the power cable touch hot surfaces.
To protect against a risk of electric hazards, do not immerse the appliance in water or any other liquid.
The appliance must be used and rested on a stable surface.
When placing the appliance on its stand, ensure that the surface on which the stand is placed is stable.
The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
BEFORE FIRST USE
It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly
disappear.
When using the steam function for the first time, do not direct the steam towards the laundry, as there
could be debris from the steam vents.
SUPPLY OF ELECTRICITY
To charge the iron, place the iron on the power base.
FILLING WITH WATER
We recommend the use of distilled water.
Make sure that both the steam control turning knob and temperature control dial are in the “OFF”
position.
Hold the iron upright so that the water-filling inlet is in a horizontal position.
Fill with water through the water filling inlet until the water reaches the “MAX” mark indicated on the
side of the iron, and never fill above this mark.
SETTING TEMPERATURE
Follow the ironing instructions on the garment label. If there is no instruction but you do know the kind of
fabric, please consult the following table.
Note: If the fabric consists of various kinds of fabrics, always select the temperature required by the most
delicate.
