Cooper Tools Cleco mPro400GC, Быстрая настройка

Страница: 8 / 20

Page 8
PL12-1004EN
03/31/2010
Cleco
®
mPro400
GC
Controller
4. Verify that the tool shown is the tool connected. Check the model and serial number. If the tool is
correct press the ACCEPT button. In the window that appears press the ACCEPT button for that
window. A screen will appear indicating that the settings are being saved. When the save process
is complete press the CANCEL button to return to the Tool Setup-Tool list screen. Press the
NAVIGATOR button. Advance to Section 1.9 for programming instructions.
Figure 1-5: Tool Setup - Tool Settings
Accept Button
Model Number
Serial Number