Type GV and GW Installation Instructions
14
CONTACT
SECTION
END PLATE
AND GASKET
SQUARE
SHAFT
CAMS
OPEN
POSITION
CLOSED
POSITION
45
°
When assembling be sure
that the roll pin hole and
punch mark on the shaft
are in vertical plane with
the punch mark in the end
plate (as shown).
TERMINALS
3, 7, 11, 15
CAMS
TERMINALS
1, 5, 9, 13
TERMINALS
2, 6, 10, 14
TERMINALS
4, 8, 12, 16
CONTACTS
SQUARE
SHAFT
CAM POSITION NO. 1
Both contacts closed.
CAM POSITION NO. 2
Both contacts open.
CAM POSITION NO. 3
One contact open and one
contact closed.
Figure 15.
Cam positions inside the Auxiliary Switch.
