Cooper Lighting Solutions Lumark AP Скачать руководство пользователя страница 4

4

Cooper Lighting Solutions    

 IB514101EN 

    

 Installation instructions

Installation Instructions – LAS Area / Site

 

ote: 

N

Only use included round pole adapter (if applicable). 

For use with round poles with outer diameter from 

4"-5". Do not use any additional adapters/spaces 

between pole mount arm and pole.

4.  Route the leads coming from the pole mount arm 

through wireway hole in to the pole.

5.  From inside the pole, insert bolts through pole, 

adapter (if applicable), pole mount arm, washers, and 

splitwashers. (Figure 8.)

6.  Hand tighten nuts onto bolts within the pole mount arm 

cavity.

7.  Torque bolts using M19 socket wrench to 39 ft-lbs Hold 

nuts still with M19 open wrench.

8.  Route wire leads from luminaire into the pole mount 

arm and slide the luminaire onto the pole mount arm. 

Secure with two Allen screws. Tighten to 30 in-lbs. 

(Figure 9.)

Figure 9.   

Figure 10.   

Figure 11.   

Figure 12.   

11.  Reinstall cover plate on to pole mount arm via four 

Phillips head screws (Figure 7.) Torque to 10 in-lbs.

ote: 

N

Be sure not to pinch wires between cover plate and 

mount arm.

Photocontrol / Shorting Cap

1.  Insert provided photocontrol (or shorting cap) into the 

receptacle and twist into locked position. (Figure 11.)

Motion Sensor Lens (If Applicable)

1.  Remove the clear plastic cap that covers the motion  

sensor receptacle on the fixture.

2.  Twist to install the provided motion sensor lens onto  

receptacle until secure. (Figure 12.)

Motion Sensor Lens

Motion Sensor

Receptacle

ote: 

N

Be sure not to pinch wires between luminaire and 

mount arm.

9.  Connect luminaire leads to leads within pole mount arm 

using provided wire nuts (Figure 10.): 
a.  Connect black lead in mount arm to black lead from 

luminaire.

b.  Connect white lead in mount arm to white lead from 

luminaire.

c.  Connect green (ground) lead in mount arm to green 

lead from luminaire.

10.  Connect pole mount leads within pole to supply wires 

(Figure 10.): 
a.  Connect supply side line voltage to black lead.
b.  Connect supply side common voltage to white lead.
c.  Connect supply side ground wire to green lead.

Allen 

Screws

(+) Line

(-) Common

Ground

Black

White

Green

Fixture

Содержание Lumark AP














Отзывы: