15
Function introduction for combination buttons
Child lock function
Press "▲" and " " simultaneously to turn on or turn o
f
f child lock function. When
child lock function is on, " " icon is displayed on remote controlle
r
. If you operate
the remote controlle
r
, the " " icon will blink three times without sending signal to
the unit.
WIFI Function
Press "MODE" and "TURBO" button simultaneously to turn on or turn off WIFI
function. When WIFI function is turned on, the " " icon will be displayed on
remote controller; Long press "MODE" and "TURBO" buttons simultaneously for
10s, remote controller will send WIFI reset code and then the WIFI function will be
turned on. WIFI function is defaulted ON after energization of the remote controller.
▲
Temperature display switchover function
Under OFF status, press " " and "MODE" buttons simultaneously to switch temp-
erature display between
℃
and
℉
.
▲
Note:
● Under 8
℃
heating function, fan speed i
s
defaulted at auto speed and it can’t be
adjusted.
● Under 8
℃
heating function, set temperature can’t be adjusted. Press
"
TURBO
"
button and the remote controller won’t
s
end signal.
● Sleep function and 8
℃
heating function can’t operate at the same time. If 8
℃
heating function has been set under cooling mode, press sleep button will cancel
8
℃
heating function. If sleep function has been set under cooling mode, start up
the 8
℃
heating function will cancel sle
e
p function.
● Under
℉
temperature display, the remote controller will display 46
℉
heating.
8
℃
heating function
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start
up or turn off 8
℃
heating function. When this function is started up, " " and "8
℃
"
will be shown on remote controller, and the air conditioner keep the heating status
at 8
℃
. Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8
℃
heating function.
● Under energy-saving function, set temperature can’t be adjusted. Press "TURBO"
button and the remote controller won’t send signal.
● Sleep function and energy-saving function can’t operate at the same time. If
energy-saving function has been set under cooling mode, press sleep button will
cancel energy-saving function. If sleep function has been set under cooling
mode, start up the energy-saving function will cancel sleep function.
