Cooper & Hunter CH-PH2240W, Инструкция по эксплуатации

Страница: 9 / 26

7
We are researching new technologies and constantly improving the quality
of our products. Specifications, design and scope of delivery may be
changed without any prior notice.
* Products must be stored in dry, ventilated storages at the temperature not lower than -30°C
In case of emergencies resort to troubleshooting methods, given in tables.
If you are unable to solve issues by means of mentioned methods, contact
a service center.
Upon expiration of the humidifier it must be disposed in accordance with
regulations, rules and by means, currently in force at a disposal station. In
case of emergencies resort to troubleshooting methods, given in tables. If
you are unable to solve issues by means of mentioned methods, contact a
service center.
9. TROUBLESHOOTING
www.cooperandhunter.com
1. When transporting, any possible impacts and movements of the
package inside a vehicle must be avoided.
2. Handling symbols on the unit’s package must be strictly observed when
transporting and storing it.
8. TRANSPORTATION AND STORAGE
Temperature
requirements*
Humidity
requirements*
Transportation and
storage
-30°С to +50°С
15% to 85%
(no
condensate)
NOTE:
All elements of the device are made of fragile material. Be
careful, try not to hit them with foreign objects and not to
drop them. Fill the water tray only with clean water without
adding any aromatic or other substances! Otherwise, it
may result in water leakage due to microcracking and
cracking on the tank, as well as loss of its properties and
damage to discs. When adding fresh water, always drain
the remaining one that was used before.
Problem: The device does not work
• Ensure that the device is connected to a power source.
• Ensure that water is in the water container and that the containerisinserted
correctly.
Problem: Air humidity does not change
• Ensure that your room is not excessively ventilated and close windows
and doors.
• Ensure that the size of your room corresponds to the recommended size
ofthis device.
Problem: Clicking noise during operation
• Ensure that the cleaning disc stack is inserted correctly.
• Ensure that no hard water deposits are located in the Basin.