Cooper & Hunter CH-PH2240W, Инструкция по эксплуатации

Страница: 6 / 26

4
4. DESCRIPTION OF THE UNIT
A : Housing cover
B : Water tank
C : Screw cap
D : Tub
E : Cleaning drum
F : Combination HEPA filter
G : Filter cover
www.cooperandhunter.com
G
F
D
E
C
A
B
Fig. 1 Equipment parts
H : Display
I : ON/OFF button
J : Timer button
K : Fan speed button
L : Humidity level button
L : Filter reset button
Fig. 2 Control panel
H I J K L M
Directions for use
Prior to the first use, especially if outdoor temperature is below zero, let the
device heat up at room temperature for 1 hour. It is recommended to use
the device at temperature ranging from 5°C to 40°C, and relative humidity
not more than 80%. Use only clean water with temperature not more than
30°C. Prior to a switching the device off for a long time (more than 2 days),
drain water from the tray and dry the discs block. Read instructions how
to clean the discs block and the tray in section «Recommendations on
maintenance of the device».
5. SCOPE OF DELIVERY
1. Air washer – 1 pc.
2. Operation manual – 1 pc.
3. HEPA filter – 1 pc.
6. OPERATION OF THE UNIT
The Air Washer System
CH-PH2240W draws in dirty air. Large particles like hair and dust, as well
as odours and smaller particles like particulate matter is filtered through
the replaceable HEPA & activated carbon filter. The air is drawn into the
cleaning drum that rotates in the water. This washes the air and the smallest
particles are bonded to the water. CH-PH2240W releases clean air evenly
and simultaneously humidifes the room climate through evaporation
technology, to provide comfortable air cleaning and natural humidification
in your home.