Page 9
Troubleshooting
It may occur that the dishwasher does not work or does not function properly.
Before calling the Helpline on 0870 241 3029 please check the following:
Problem
Symptom
Remedy
Dishwasher will not start
• Power failure
• Fuse blown in plug
• Door not properly shut
• Water supply not turned to
ON.
• Check power supply
• Replace fuse
• Shut door and latch
• Check water supply
Dishes are not clean
Water does not drain out
Machine keeps draining water
• Improper loading
• Spray arm not rotating
freely
• Arrange dishes so spray
reaches all surfaces
• Do not overload the
dishwasher
• Remove obstruction
• Check if filter is out of its
seating and obstructing
the arm
• Draining hose kinked or
blocked
• Hose is above height of the
appliance
• Pump is blocked
• Water level is too high
• Clean filter and run a
normal wash cycle empty
• Faulty operation of inlet
valve
• Check hose
• Reposition the hose so
that water can drain
downhill from the lowest
point of the dishwasher
Filter
Wash the filter daily. Lift out by the handle and
remove any residues (Figure 7). There may be
water left in the bottom of the appliance under the
filter after a wash cycle – this is normal and not a
malfunction.
The filter efficiently removes food residue from
the wash water, allowing it to be re-circulated
during the cycle.
Never use the appliance without the filter fitted.
Spray arm
Make sure that there is nothing that will prevent
the spray arm from spinning freely.
Cleaning and maintenance
FIGURE 7
FILTER
HANDLE
