P36
P37
The replacement fuse
1, fuse at the top of batteries.
2, if the fuse fuse, customs breakpoint fire Switches and
circuit switching problem. With the correct installation of the
new ampere fuse. Connect the switch and watch the work of
electrical installations. Fusing immediately if the fuse again,
please COOLSTER dealer or repair shop contact.
Warning:
● Do not use the recommended ampere rating higher than
the fuse. Under the correct rating is the fuse will cause
large-scale damage to electrical system and will cause the fire.
Fuse
Provides fuse: 10 amps
Fuse box
CLEANING
1, in order to keep the car clean and protect the surface
appearance of the painting, electroplating, should regularly or
irregularly its cleansing. When cleaning, use of external
surface water irrigation, rush soil. Use a soft cloth or sponge
dip cleaning liquid bubble gently cleans the outer surface, to
avoid residual gravel surface and paint scratches electroplating
layer. Finally reuse water for irrigation.
2, attention:
● washing, to avoid using the high-pressure water erosion
under parts:
(1) ignition switch;
(2) multi-purpose switch;
(3) Below cushion;
(4) The exhaust pipe muffler exports;
(5) air filter inlet
After the car wash thoroughly dry, and then start engine,
running for a few minutes. Finally repeatedly braking
performance brake inspection and adjustment until braking
performance standards so far.
Special Note: in the hot engine, the first will not wash.
Engine room temperature with the same question again when
cleaning. If water pressure caused the brake, the former
damping seals and electrical parts Loss.
