Heated Hand Grips and Throttle Combo (Kit P/N 715 001 849)
The following symbols may be used in this document:
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazard situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates an instruction which, if not followed, could severely damage vehicle components or other property.
WARNING
– For safety reasons, this kit must be installed by an authorized BRP dealer.
– This kit is designed for specific applicable models only (authorized BRP dealers will confirm model(s)). It is not rec-
ommended for units other than the one (those) for which it was sold.
– This instruction sheet MUST be given to the purchaser.
– Should removal of a locking device (e.g. lock tabs, self-locking fasteners, etc.) be required when undergoing dis-
assembly/assembly, always replace with a new one.
– Torque wrench tightening specifications must strictly be adhered to.
– Always wear EYE PROTECTION AND APPROPRIATE GLOVES when using power tools.
– Unless otherwise specified, engine must be OFF when performing any operation on the vehicle.
– Always be aware of parts that can move, such as wheels, transmission components, etc.
– Some components may be HOT. Always wait for engine to cool down before performing work.
TORQUE TO BE USED WHEN TORQUES ARE NOT SPECIFIED IN TEXT
FASTENER
SIZE
5.8
GRADE
8.8
GRADE
10.9
GRADE
12.9
GRADE
M4
1.8 ± 0.2 N•m
(16 ± 2 lbf•
in
)
2.8 ± 0.2 N•m
(25 ± 2 lbf•
in
)
3.8 ± 0.2 N•m
(34 ± 2 lbf•
in
)
4.5 ± 0.5 N•m
(40 ± 4 lbf•
in
)
M5
3.3 ± 0.2 N•m
(29 ± 2 lbf•
in
)
5.0 ± 0.5 N•m
(44 ± 4 lbf•
in
)
7.8 ± 0.7 N•m
(69 ± 6 lbf•
in
)
9.0 ± 1.0 N•m
(80 ± 9 lbf•
in
)
M6
7.5 ± 1.0 N•m
(66 ± 9 lbf•
in
)
10.0 ± 2.0 N•m
(89 ± 18 lbf•
in
)
12.8 ± 2.2 N•m
(113 ± 19 lbf•
in
)
16.0 ± 2.0 N•m
(142 ± 18 lbf•
in
)
M8
15.3 ± 1.7 N•m
(135 ± 15 lbf•
in
)
24.5 ± 3.5 N•m
(18 ± 3 lbf•ft)
31.5 ± 3.5 N•m
(23 ± 3 lbf•ft)
40.0 ± 5.0 N•m
(30 ± 4 lbf•ft)
M10
29 ± 3 N•m
(21 ± 2 lbf•ft)
48 ± 6 N•m
(35 ± 4 lbf•ft)
61 ± 9 N•m
(45 ± 7 lbf•ft)
73 ± 7 N•m
(54 ± 5 lbf•ft)
M12
52 ± 6 N•m
(38 ± 4 lbf•ft)
85 ± 10 N•m
(63 ± 7 lbf•ft)
105 ± 15 N•m
(77 ± 11 lbf•ft)
128 ± 17 N•m
(94 ± 13 lbf•ft)
M14
85 ± 10 N•m
(63 ± 7 lbf•ft)
135 ± 15 N•m
(100 ± 11 lbf•ft)
170 ± 20 N•m
(125 ± 15 lbf•ft)
200 ± 25 N•m
(148 ± 18 lbf•ft)
M16
126 ± 14 N•m
(93 ± 10 lbf•ft)
205 ± 25 N•m
(151 ± 18 lbf•ft)
255 ± 30 N•m
(188 ± 22 lbf•ft)
305 ± 35 N•m
(225 ± 26 lbf•ft)
M18
170 ± 20 N•m
(125 ± 15 lbf•ft)
273 ± 32 N•m
(201 ± 24 lbf•ft)
330 ± 25 N•m
(243 ± 18 lbf•ft)
413 ± 47 N•m
(305 ± 35 lbf•ft)
NOTE:
The illustrations in this document show typical construction of the different assemblies and may
not reproduce the full detail or exact shape of the parts; however, they represent parts that have the
same or similar function.
Installation time is approximately
1
hour.
Printed in Canada. (vsi2013-033_rev1 en AP)
©2012 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
Instruction Sheet P/N 487 801 238
1 / 11
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.
