Coolster ATV-3150CXC, Руководство пользователя

Страница: 42 / 58

P40
1, in order to keep the car clean and protect the surface
appearance of the pain ng, electropla ng, should regularly or
irregularly its cleansing. When cleaning, use of external surface
water irriga on, rush soil. Use a so cloth or sponge dip cleaning
liquid bubble gently cleans the outer surface, to avoid residual
gravel surface and paint scratches electropla ng layer. Finally
reuse water for irriga on.
2, a en on:
● washing, to avoid using the high-pressure water erosion
under parts:
(1) igni on switch;
(2) mul -purpose switch;
(3) Below cushion;
(4) The exhaust pipe muffler exports;
(5) air filter inlet
A er the car wash thoroughly dry, and then start engine,
running for a few minutes. Finally repeatedly braking
performance brake inspec on and adjustment un l braking
performance standards so far.
Special Note: in the hot engine, the first will not wash. Engine
room temperature with the same ques on again when cleaning.
If water pressure caused the brake, the former damping seals and
electrical parts Loss.
CLEANING