Coolster ATV-3150CXC, Руководство пользователя

Страница: 22 / 58

P20
Cold Start and engine prehea ng
Note: This car has used to control the
opera on of brake motor starter switch. Only in
pinch engine brake handle on when to start. We
had closed choke before delivery.
Electric starter:
1, igni on switch come to the opera ng
posi on.
2, the fuel valve turn to: “see right picture”
posi on.
3,step on the rear brake pedal. (Launched in order to prevent
the car a er forward).
4, press the start switch.
Note: If the engine can not start, should be released star ng
switch, wait a few seconds, then try again. Each a empt, as far as
possible in a short period of me in order to protect the ba ery.
Each starter not to exceed 5 seconds when the engine. If the
electric motor can not start, please use pedal starter manner.
Note: In order to achieve maximum engine life, before moving
to engine should always be preheated. Not on a Cold engine
emergant speedup.
Foot start:
1, igni on switch come to the opera ng posi on.
2, the fuel valve turn to: “see right picture” posi on.
3,step on the rear brake pedal. (Launched in order to prevent
the car a er forward).
4, will be moved overseas arm feet starter, it will be slightly
down with their feet un l the stampede occlusal gear up and then
ride down stamping on the powerful.
Note: Before star ng, please let engine prehea ng 3-5 minutes,
so that the full engine lubrica on to reduce wear and prolong life.