Coolster ATV-3150CXC, Руководство пользователя

Страница: 33 / 58

P31
1, the measurement of oil (See left picture)
A. Engine preheater minutes.
B. When the engine stopped opera ng, hold on a few minutes
later, the oil Cypriots will be removed a er the oil-observa on.
C. The oil should be located at the highest and the lowest
among the oil-marker. If the oil level low, should be enough oil to
rise to the oil-appropriate.
2, oil and oil filter replacement of the replacement. (See right
picture)
A. Engine preheater minutes.
B. engine will stop. In an engine oil was placed underneath.
C. discard release oil bolts, release oil. Put oil may moderate
shaking body to be inside the engine from impuri es.
Oil
D. installed release oil bolts, and then full of engine oil.
Tightening oil Cypriots.
E. Star ng engine and a few minutes to preheat. Preheat should
check whether there are oil spills. If it appears that an oil spill,
should immediately stop engine and check reasons.
F. engine should be flameout, and then check the oil height, if
necessary, amended.
3, the replacement of oil in the second about a month or so to
clean oil filters
Nowe:discard engine oil pai oil bolts, 0-rings, springs and oil filters
will swap out.
Go into oil
Release oil