Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 45
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
Deleting a block of waypoints
•
Select the LEGS page (LEGS key).
•
Line select, using the softkeys, the waypoint immediately following the last waypoint to be
deleted. This will be placed into the scratchpad.
•
Line select the waypoint in the scratchpad to the first waypoint of the block of waypoints
to be deleted.
•
Review the modified route on the ND.
•
Execute the modified route.
Entering a crossing radial from a fix as a waypoint
•
Select the FIX page (FIX key).
•
Enter the desired fix identifier.
•
Enter the desired radial from the fix on the DNTKFX (downtrack fix) line, or press the
ABEAM prompt if the desired radial should be perpendicular to the route course.
•
Line select the DNTKFX or ABM line to the scratchpad.
•
Select the LEGS page, or the DIR INTC page if the fix is prior to the active waypoint.
•
Line select the fix/radial/distance to the desired position in the route.
•
Link any route discontinuities.
•
Review the modified route on the ND.
•
Execute the modified route.
Entering an along track speed/altitude crossing waypoint
•
Select the LEGS page (LEGS key).
•
Line select the reference waypoint to the scratchpad.
•
Enter a slash (/) then a minus sign (-) if before the reference waypoint, followed by
distance. E.g. LAX/-10 or ORL/22.
•
Line select the scratchpad entry to the reference waypoint.
•
Enter desired speed/altitude for crossing waypoint.
•
Execute the modified route.