Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 5
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
3. Line Select Keys (LSK)
The LSK provides for the entry, selection, or
deletion of information on an adjacent line
on the display.
•
Entry – Moves information to the
selected line from the scratchpad.
•
Selection – Selects a page,
procedure, or performance mode as
required.
•
Deletion – Deletes information on the
selected line after pushing the DEL
key.
4. BRT Knob
Manually adjusts the brightness of the CRT.
5. Message Lights
MENU
Illuminates when any non active
subsystem has a request pending
(not simulated).
MSG
Illuminates when the FMS
generates a message displayed in
the scratchpad.
DSPY
Illuminates when the current
display is not related to the active
leg or current performance mode.
OFST
Illuminates when the aircraft is
flying a parallel offset of the active
flight plan (not simulated).
6. Miscellaneous Keys
CLR
Push to clear the scratchpad.
/
Used as a data separator.
DEL
Push to delete the data in the data
field if allowed.
7. +/- Key
All numeric entries into the scratchpad are
assumed to be positive. If a negative values
is required, pushing the key enters a minus.
Pushing the key a second time changes to a
plus.
8. Alpha/Numeric Keys
Push to enter selected character into the
scratchpad.
9. Function Keys
EXEC
Command key of the FMS. Push
to implement changes to the
active flight plan.
NEXT PAGE Displays the next page for
multiple pages.
PREV PAGE Displays the previous page for
multiple pages.
INIT REF
Selects the POS INIT page for
initialization if position is not set.
Selects the PERF INIT page for
initialization if performance
data is not set. Selects the
APPROACH REF page in-flight.
RTE
Selects RTE1 and RTE2 pages.
DIR INTC
Selects the page for flying
direct to, or intercept a course
to any on or off-route waypoint
while on the active leg.
HOLD
Allows definition of a holding
pattern at any desired
waypoint or at the aircraft
present position.
LEGS
Provides detailed data
concerning every leg of a flight
plan and allows data to be
entered and deleted for each
leg.
DEP ARR
Provides for selection of
departure and/or arrival
procedures and runways.
PROG
Displays current dynamic flight
information such as distance to
go, cross track error, fuel, wind,
etc.
FIX
Allows creation of waypoint
fixes from the intersection points
between present route and the
selected radials from known
waypoints.
CLB
Displays current or planned
climb mode.
CRZ
Displays current or planned
climb mode.
DES
Displays current or planned
descent mode.
MENU
Selects MENU page to select a
subsystem.