Cool Nights Spas CN 10000, Руководство пользователя

Страница: 11 / 52

9
Caution: Connect only to a circuit protected by a residual
current device. Test the RCD before each use of the
spa.
Attention: Connecter uniquement a un circuit protege par un
disjoncteur differentiel.
Toujours verifier l'efficacite du disjoncteur differentiel
avant d'utiliser le bain. Bonding lugs. Cosses demise a
la masse.
Use the copper conductors only. Employer
uniquement des conduteurs de cuivre.
Nos stations thermales sont certifiées par les Services
de l'Essai d'Intertek NA Ltd. Ontario à CAN/CSA-
C22.2 No. 218.1-M89 et ANSI/UL 1563.
Parts with extra low voltage not exceeding 12v must be
inaccessible to a person in the spa. Earthed appliances must be
permanently connected to fixed wiring. Parts incorporating
electrical components, except remote control devices, must be
located or fixed so that they cannot fall into the spa. Appliances
should be supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30ma.
Means for disconnection must be used in fixed wiring in
accordance with wiring rules.
Important – To allow the 240V GFCI to function properly, connect
the white Neutral wire from the spa to the Neutral terminal on the
GFCI breaker, not the Neutral bus in the GFCI breaker box. An
improperly connected Neutral causes the GFCI breaker to trip.