17
Pop-up: HACCP recording
Fill in the input mask:
-
employee (Author)
product
-
weight
Confirm with the "OK" key.
Place the product in the unit, place the core probe
in the product.
The corresponding cycle interface appears on the
display.
Cycle interface: freeze
Center, large digits: calculated end time
Small digits: date of end of cycle
The displayed time may change repeatedly during
the cycle depending on the progress and core
temperature.
The elapsed time is displayed below the bar.
Left side:
Display of the air temperature and below of the core temperature probe (if it has been inserted).
The controller automatically detects whether the core probe has been inserted and displays this after
a running time of 5 min. If the core probe has not been inserted and detected, the time programme
cycle runs automatically.
Right side:
The individual steps of the cycle are displayed. The small, light blue arrow and the light blue
snowflakes indicate
the unit’s current cycle step.
The blue product key takes you to the set cycle steps.
Cycle step: freeze
The dark blue line below the snowflakes indicates
which step of the cycle the controller is in.
You can use the corresponding key to select
which step of the cycle you want to view and / or
change.
