COOL BOSS CB-20SL Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 36

COOL BOSS CB-20SL Скачать руководство пользователя страница 29

Cool Boss Evaporative Air Cooler

29

P/N 5900275 — January 2022 — Rev. A

To test the GFCI

:

Plug the cord into a properly grounded wall outlet. The indicator should be illuminated. Refer to the

figure below.

a.

If the indicator is not illuminated, check the wall outlet for power.

b.

If power is present at the outlet, the Power Cord or the GFCI requires replacement.

Press the Test button. The Indicator should go out and no power should be available at the Cool
Boss.

Press the Reset Button and the Indicator should be illuminated again. The Cool Boss should now

be provided power and is ready for use.

If the GFCI does not function, take the unit out of service, contact your dealer or BendPak Support

at

coolboss.com.com/support

, via email at

[email protected]

, or by phone at

(800)

253-2363

.

⚠

WARNING

Do not use the Cool Boss if the GFCI fails this test.

⚠

WARNING

The GFCI does not protect against electrical shock due to contact with both circuit
conductors or a fault in the wiring supplying the GFCI.

⚠

WARNING

Do not operate your Cooler if you find maintenance issues; instead, remove it from
service, then Assistance with your Evaporative Cooler is available from your dealer,

by calling Cool Boss at

(805) 933-9970

, or by emailing

[email protected]

. You may also contact Cool Boss for parts

replacement (please have the serial number and model number of your unit

available).

To store the Cool Boss

:

1. Drain the Reservoir and wipe clean and dry.
2. Secure the electrical cord.
3. Cover the Cooler to prevent dust build-up and store in a dry, protected area.

«
...
27
28
29
30
31
...
»

Содержание CB-20SL





































Отзывы:

Нет отзывов