COOL BOSS CB-20SL Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 36

COOL BOSS CB-20SL Скачать руководство пользователя страница 22

Cool Boss Evaporative Air Cooler

22

P/N 5900275 — January 2022 — Rev. A

Information about color code conventions in other regions and countries is available online. Make
sure your Electrician installs the Plug in accordance with all applicable national and local electrical

codes.

Plug the Cool Boss power cord into a 220 VAC outlet protected by an appropriate circuit breaker.

Test the unit to verify the Cooler is working normally.

Additional electrical information:

Damage caused by improper electrical installation (such as not grounding the unit) voids the
warranty.

⚠

WARNING

Disconnect power before performing any troubleshooting or maintenance. Make
sure the unit cannot be re-energized until you are done.

⚠

WARNING

Plug into a properly grounded electrical receptacle only.

⚠

WARNING

Never remove the Ground Prong from the plug end of the Power Cord.

Ground Fault Circuit Interrupter (GFCI)

The Cool Boss incorporates a Ground Fault Circuit Interrupter. The GFCI acts as a Circuit Breaker

in the event of a Ground Fault. A Ground Fault occurs when the power conductor comes into

direct contact with the equipment’s frame or Ground. To test the GFCI see the

Maintenance

⚠

WARNING

The Cool Boss must connected to a properly grounded electrical outlet for the
GFCI to function. If the Outlet is not correctly grounded or if the Power Cord is

damaged preventing the Ground connection, the GFCI cannot protect you from

electrical shock.

⚠

WARNING

The GFCI does not protect against electrical shock due to contact with both circuit
conductors or a fault in the wiring that supplys the GFCI.

«
...
20
21
22
23
24
...
»

Содержание CB-20SL





































Отзывы:

Нет отзывов