COOL BOSS CB-20SL Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 36

COOL BOSS CB-20SL Скачать руководство пользователя страница 12

Cool Boss Evaporative Air Cooler

12

P/N 5900275 — January 2022 — Rev. A

Remote Control

The figure below details the remote control and identifies the control functions as defined above. The
remote will be found in the box with the Casters. The Remote Control utilizes infra-red light to

communicate with the Cool Boss. The Remote must be within 32 ft. / 10 m and have a direct line of

sight to the Cool Boss Control Panel.

Important

Pull the plastic insulator out of the Remote’s Battery compartment prior to first use.

Pushbutton functions are as described in the Control Panel section above.
The Remote Control requires one CR2024 Button Style Lithium Battery (supplied with the Remote).

To replace the Remote Control’s Lithium Battery

:

On the back of the Remote find the rectangular indentations on the bottom edge. Push the left

square toward the center of the Remote and hold.

Gently pull the larger rectangle away from the Remote to access the Battery.

Replace with a new Battery. Verify the positive side is facing you as shown above.

Gently push the battery and the carrier back into the Remote.

Important

Lithium Batteries are hazardous waste, dispose of at hazardous waste collection
facilities only.

«
...
10
11
12
13
14
...
»

Содержание CB-20SL





































Отзывы:

Нет отзывов