Cool
Plug
CooLinkHUB HVAC Bridge
CooL CoolPlug
QIG Version 2.2
3
Cool
Plug
CooLinkHUB
Safety Guidelines, Warnings and Cautions
Read and understand the following guidelines to ensure a safe installation.
Warnings
Failure to follow WARNING may result in injury or death.
This equipment is to be installed by an accredited electrician or equivalent technical
person, as per these installation instructions.
Read the installation instructions before connecting the system to the power source.
All electrical work must be performed by a licensed technician, according to local regulations.
Ultimate disposal of this product should be handled according to all national laws and
regulations.
Installation of the equipment must comply with local and national electrical legislation for
installation of electric equipment.
Do not install the devices outdoors or exposed to direct solar radiation, water, high relative
humidity or dust.
Install the equipment only in a restricted access location.
When wall mounting, be sure to fix firmly on a stable surface and in accordance to the
instructions below.
When DIN rail mounting, fix the devices properly to the DIN rail following the instructions
below.
When mounting on DIN rail inside a metallic cabinet be sure to properly connect to earth.
Unplug power when connecting the wires.
Pay attention to the polarity of power and communication cables when connecting them.
Disconnect power of any bus or communication cable before connecting the system.
Cautions
Failure to follow CAUTION may result in serious injury.
Do not allow children to play with the CoolPlug or CooLinkHUB.
Do not disassemble, modify or repair the CoolPlug or CooLinkHUB, do contact
CoolAutomation for support. Unauthorized modifications or repairs may result in electric
shock or fire.
Do not expose the CoolPlug or CooLinkHUB to moisture. Water can damage the
CoolPlug or CooLinkHUB resulting in an electrical components failure, electric shock or
fire.
