Cookworks MY-CJ6002W, Инструкция по уходу и эксплуатации

Страница: 7 / 19

ISSUE-1 4/9/2017 7
Using the pressure cooker
1.
Use utensils suitable for non stick pans when using this item.
2. Wash all removable parts before first use and dry thoroughly.
3. Place the pressure cooker housing on a stable, flat, heat resistant
surface and away from surfaces that may be damaged by steam.
4. Fit the condensate cup and remove the lid.
5. Unwind the cable and plug into the pressure cooker housing and
then plug into the mains supply. The red POWER indicator will
illuminate. For safety do not allow the cable to dangle over the
edge of units.
6. Place the ingredients to be cooked into the bowl. Do not fill past
the MAX (10) mark and ensure approximately 2 cm of liquid is in
the bowl.
7. Check that the seal is fitted into the lid and close fully ensuring
that the ‘locked’ padlock symbol is aligned with the alignment
mark (

).
8. Turn the exhaust valve to the pressure position (fig.4
& 5).
9. Select the desired cooking time on the control knob.
The COOK indicator will illuminate to show that the
cooker is working.
10. When the cooker is up to pressure, the float valve will pop up (fig.
5) and some hissing and a small amount of steam is normal just
before the float valve pops up.
11. After the cooking time has finished, a bell will sound and the
pressure cooker will turn off automatically and the cook indicator
will extinguish.
12. Allow the pressure to normalise and the float valve will drop (fig.
6).
Float valve down
Cooker pressure normal
Float valve up
Cooker
Fig. 6
Fig. 5
Fig. 4