Cookworks CM8500A-GS, Инструкция по уходу и эксплуатации

Страница: 10 / 17

Draft 2 22/07/2021 10
TO USE – USING THE STEAM NOZZLE
1.
Place the espresso machine on a stable, flat, heat resistant
surface and away from surfaces that may be damaged by
steam.
2.
Fill the water tank and ensure the cover is fitted onto the
steam nozzle.
3.
Fully unwind the cable, plug in and switch on. For safety
do not allow the cable to dangle over the edge of units.
4.
Press the ON/OFF ( ) button to turn the machine on and
wait for the coffee indicator to illuminate (green).
5.
Press the steam ( ) button and wait for the steam
indicator to illuminate (green).
6.
Place the cold milk (or other beverages to be heated) into a
suitable container (see note section on following page).
7.
Position the container under the nozzle so that the nozzle
is approximately halfway into the milk.
8.
Move the steam control knob slowly towards the steam
symbol ( ) and after a short while the steam will flow and
the milk will begin to froth. As the froth is generated, move
the container so that the nozzle moves through the milk but
always ensure the nozzle is below the surface.
9.
When the milk is hot and sufficient froth has been
generated, turn the s
team control knob back to the ‘ ’
position. Keep the steam nozzle beneath the surface of the
milk (to prevent splattering) until the steam has stopped
flowing.
10.
When the steam nozzle has been used for the final time,
switch off the espresso machine by pressing the ON/OFF
( ) button.
11.
To prevent steam nozzle clogging, remove and wash the
nozzle cover and wipe the steam nozzle tip with a damp
cloth.