Draft 2 22/07/2021
13
Descaling
Descale with a proprietary descaler suitable for espresso
machines and dilute in accordance with the instructions on the
pack.
1.
Fill the water tank to the MAX level with the descaler
solution.
2.
Plug in, and check that the steam control knob and all
buttons are in their off position. Fit an empty filter and
filter holder.
3.
Switch on using the ON/OFF ( ) button and wait for the
green coffee indicator to illuminate.
4.
Place a jug under the brewing nozzles and then press the
coffee (
) button. Allow approximately 2 espresso cups
(200ml approx.) of the liquid to flow from the brewing
nozzles.
5.
Press the coffee (
) button again to turn off this function
and now place the jug under the steam nozzle with the tip
below the surface of the liquid.
6.
After a few seconds, press the steam ( ) button, and when
the green indicator has illuminated allow steam to flow for
about a minute.
7.
Press the steam ( ) button again, to turn off this function
8.
Switch off the espresso machine using the ON/OFF ( )
button and allow the descaler solution to stay in the
espresso machine for 15 minutes.
9.
Restart the espresso machine and repeat steps 3
–
7 a
further four times.
10.
Discard any remaining descaling solution in the water tank.
Rinse the tank thoroughly with clean water and refill to the
max line.
11.
Repeat steps 3
–
7 above a further three times to ensure pipe
work is thoroughly flushed.
12.
The espresso machine in now ready for use.
Содержание CM8500A-GS
Страница 17: ...Draft 2 22 07 2021 17...