3
OWNER’S MANUAL INSTALLATION AND OPERATION
A P P R O V E D F O R C O M M E R C I A L U S E
CookTek’s MagnaWave Buffet Woks have been tested to be in conformance with UL
197 and CSA C22.2 standards and bear the commercially rated approvals. CookTek’s
Magna Wave Buffet Woks have been tested to be in conformance with the European
Economic Area standards and bear the CE marking signifying European Conformity.
C O O K I N G B Y P O W E R C O O K ( WAT TA G E )
General Operation:
Plug the Buffet Wok into a grounded, single-phase receptacle. Models will run on 100-
120V drawing up to 1800W depending on model, or on 208-240V drawing a maximum
of 3500W depending on the model. Check rating plate on unit to verify correct voltage
and wattage. Voltages below 120V or 240V can result in less than rated power and
slower heating times.
LCD Information Center display when plugged in, but in the OFF position.
NOTE: For proper operation, an independent dedicated circuit should be used for
each unit installed. Each circuit should be protected with a 20 amp circuit breaker.
What to Do:
1. Turn the Buffet Wok “ON” by pressing the Power button on the glass.
2. Adjust your power settings using the slider from 0-100 (MAX), also use the
Precision Control buttons to adjust to more precise power settings.
3. Use your finger on the slider or Precision Control Buttons to adjust the power
levels. The left side will lower power and to the right will increase power.
LCD Information Center will display this when in Cook mode. The pan logo in the upper
right corner indicates a pan is on the unit, if there is an “X” across the pan the unit is
indicating there is a non-induction compatible pan on the unit or no pan at all.
4. To turn the Buffet Wok off, press the power button on the glass and the LCD
information center will display the CookTek logo as in the picture below.
M 3 5 0 0 G
M
P O E R
M
Содержание CKT0044
Страница 2: ......
