CookTek CKT0044, Руководство пользователя

Страница: 13 / 22

Error
Code Error Cause Displayed Message Troubleshooting
1 Shorted RTD Temperature sensor failed.
Call dealer. Service Required
2 Opened RTD Temperature sensor failed.
Call dealer Remove any pans from Buffet
Wok surface and let unit cool.
Then turn unit off, then on.
If problem was temperature
related, the unit will return to
normal operation, otherwise
service is required.
3 Over current (peak) Incompatible Pan. Try different cookware.
Service may be required
4 Open TCO Overheating. Check Airflow.
Unplug, let cool. Check airflow. Clear air vents.
Listen for fan operation.
5 Air flow blocked Airflow blocked.
Clean grease filter. Check to ensure the grease filter
is clean and dry. Make certain
there are no foreign objects
blocking air flow. Check the air
filter to ensure that the arrow on
the filter is pointing up.
6 High line voltage Input voltage too high.
Check mains voltage. To reset, unplug unit, wait 5
seconds, and plug in again.
If problem persists, have an
electrician monitor the line
voltage.
7 Hardware Failure Call dealer for service. Service required.
8 Zero cross failure Call dealer for service Turn unit off, then on. Plug unit
into outlet on different circuit
breaker. If problem persists,
service is required on device.
9 Clock corrupt Reset clock. Reset Clock
10 Pan RTD failure Pan temperature sensor
failed. RFID Pan needs repair.
Service needed for Pan
11 Tag Communication
failure Reposition pan & cycle power. Ensure the RFID tag on the pan
is properly located
12 RFID Reader Failure Call dealer for service. Service Required
14 User Interface Error Cycle power. Service Required
16 Critical Error Call dealer for service. Service Required
In the event of a Possible Malfunction, your CookTek MagnaWave Buffet Wok will display
an Error Code on the LCD Information Center and the unit will beep the number of
times indicated by the error. Please consult the following table when encountering an
Error Code. To reset the error conditions remove the pan from the unit and press the
Power button or unplug the unit.
11
OWNER’S MANUAL INSTALLATION AND OPERATION