10
06
[09] x4
[13] x4
20-45mm
[09]
[09]
[13]
+45mm
Secure the hob to the worktop by attaching the brackets as shown.
Connection to the gas supply
THE CONNECTION TO THE GAS SUPPLY MUST ONLY BE MADE BY A QUALIFIED
GAS INSTALLER
• The connection of the hob to the gas pipe network or gas cylinder must be made by means of a
rigid copper or steel pipe with fittings complying with local regulations.
• A connecting elbow is pre-fitted to the hob. This elbow terminates in an external 1/2” BSP
connecting thread complying with ISO 228-1:2003. The connection made to the pre-fitted elbow
MUST be suitable for connecting to this thread. If ANY other connection type or thread size is used
a suitable adaptor MUST be fitted.
• The qualified gas installer must ensure that the operation of the burners has been correctly verified
before use.
TRAG10584 - 200000010 - Cooke and Lewis 5 Burner Gas on Glass v3b Rv2.indd 10
13/06/2017 16:23
