Safety
11
Problem
Possible causes
Solution
The Cooking Mode
Indicator comes on, but
heating does not start.
High temperature of the hob.
Check that the air vents are not
blocked.
The fan has failed.
Contact the Customer Service
helpline shown in this manual.
The power board is damaged.
Heating stops suddenly
during operation and the
display flashes “u”.
The pan type is not suitable.
Use the correct pan. See the
section ‘Cookware’ in the
instructions.
The pan diameter is too small.
The hob has overheated.
The hob has overheated. Let
the hob cool down and push
‘On / Off’ to restart.
The pan detection circuit is
damaged.
Contact the Customer Service
helpline shown in this manual.
Multiple cooking zones
display “u”.
The power board and display board
connection has failed.
Contact the Customer Service
helpline shown in this manual.
The display board has failed.
The main board has failed.
Fan motor sounds
abnormal.
The fan motor is damaged.
Contact the Customer Service
helpline shown in this manual.
Recycling & disposal
Waste electrical products (WEEE) should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local governmental authority, domestic
waste disposal services or the retailer where the product was bought for recycling advice. The
wheelie bin symbol on the product or its packaging indicates that this product cannot be treated
as normal household waste. This product must be handed over to an electric and electronic equipment
collection point for recycling.
On ensuring that this product is disposed of correctly, you will help to avoid possible negative
consequences for the environment and public health, which could occur if this product is not handled
correctly.
211859_s1_s4-5059340186696-C&L-A5-SM-Safety-V01-Multi.indd 11
211859_s1_s4-5059340186696-C&L-A5-SM-Safety-V01-Multi.indd 11
08-01-2021 16:26:44
08-01-2021 16:26:44
211859_s1_s4-5059340186696-C&L-A5-SM-Safety-V01-Multi.pdf, Cycle:1, Status:Approved
Printed by Fang Yuan, 18/03/2021 03:07:15
page 12 of 76 pages
