Cooke & Lewis 5059340127514, Руководство пользователя, Страница: 36 / 37

In the event of a fault, the induction hob will automatically enter a safety mode and diagnose the likely issue. The most
common error codes are shown below.
EN
If your hob develops a fault
EN Care & maintenance
Error Possible Cause What to do
No pot or pot not suitable Choose the suitable pan
ER03 Water or pot on the glass over the control panel Clean the user interface
F1E The connection between the display board and
the left mainboard is fail. (The cooking zone w ith
indicator showing “E”)
Repair is required. Contact
Customer Services.
F3E Coil temperature sensor failure. (The cooking
zone w it h indicator showing “E”)
F4E Mainboard temperature sensor failure. (The
cooking zone w it h indicator showing “E”)
E1E Temperature sensor of the ceramic glass plate is high
E2 E Temperature sensor of the IGBT is high Please restart after the induction
hob cools down.
E3 E Abnormal supply voltage (too high)
Repair is required. Contact
Customer Services.
E4 E Abnormal supply voltage (too low)
E5 E Temperature sensor failure(the cooking zone w ith
indicator showing “E”)
This appliance respects laws of the suppression of radio interference. As the Manufacturer has
a policy of continuous product improvement, it reserves the right to adapt and carry out any
modi
fi
cation considered necessary without prior warning.