Cooke & Lewis 5059340127514, Руководство пользователя, Страница: 26 / 37

01
Using your induction hob
Note: If you do not select a cooking zone and power level within one minute, the hob will switch off automatically.
2. Place a pan suitable for induction cooking on a cooking zone; ensure that the base of the pan and the cooking
surface is clean and dry.
3. Choose the zone using and “0” will flash. If no power level is selected within 5 seconds, “–” will be displayed.
" or key
1. Touch and hold the On/Off contro l. The hob will beep once and the zones will show to indicate it is on standby
mode.
4. Select the power level by pressing the key "
5. The default power level is "5" . Touch " "
or "
" " .
" keys to select other power levels.
6. If you do not set power levels within one minute, the induction hob will automatically be switch ed off. You
will need to start again at step 1.
7. You can modify the heat setting at any time during cooking.
When you have fi nished cooking
1. Select the cooking zone .
2. Press the key until the power level is zero.
Note: The hob will display “H” to show the cooking zone is still hot. It will disappear when the surface cools
down to a safe temperature.
This is due to the convection of heat generated in the pan transferring back to the cooking surface of the
hob during use and is perfectly normal.
It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is still
hot.
Important
If the display flashes
alternately with the power level setting, this means that:
• you have not placed a pan on the correct cooking zone , or
• the chosen pan is not suitable for induction cooking , or
• the pan is too small or not correctly centred on the cooking zone .
As a result the hob will automatically be switch ed off after one minute.
EN Use
“-”