Cooke & Lewis 3663602494362, Руководство пользователя, Страница: 39 / 64

Installation 38
Error Possible cause What to do
No pot or pot not suitable Choose the suitable pan
ER03 Water or pot on the glass over the control Clean the user interface
F1E
The connection between the display board and the left
mainboard is fail. (The cooking zone which indicator
showing “E”)
Repair is required. Telephone
the customer service number
to book an engineer visit.
F3E
Coil temperature sensor failure. (The cooking zone which
indicator showing “E”)
F4E
Mainboard temperature sensor failure. (The cooking zone
which indicator showing “E”)
E1E Temperature sensor of the ceramic glass plate is high
E2E Temperature sensor of the IGBT is high
Please restart after the
induction hob cools down.
E3E Abnormal supply voltage (too high)
Repair is required. Telephone
the customer service number
to book an engineer visit.
E4E Abnormal supply voltage (too low)
E5E
Temperature sensor failure (the cooking zone which indicator
showing “E”)
This appliance respects laws of the suppression of radio interference. As the Manufacturer has a policy of
continuous product improvement, it reserves the right to adapt and carry out any modification considered
necessary without prior warning.
Repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable
equipment damage as well as danger to the user, and the guarantee will be invalid.
To arrange a service call, please contact our customer services on one of the following Toll Free numbers,
you must contact the number in the country in which you purchased the hob.
UK 0800 324 7818 uk@kingfisherservice.com
Eire 1-800 932 230 eire@kingfisherservice.com
Recycling & disposal
Waste electrical products (WEEE) should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local governmental authority, domestic waste
disposal services or the retailer where the product was bought for recycling advice.
The wheelie bin symbol on the product or its packaging indicates that this product cannot be
treated as normal household waste. This product must be handed over to an electric and electronic
equipment collection point for recycling. On ensuring that this product is disposed of correctly, you will help
to avoid possible negative consequences for the environment and public health, which could occur if this
product is not handled correctly.
211827_s1_s4-3663602494362-C&L-SM-A5-Safety-V01.indd 38 211827_s1_s4-3663602494362-C&L-SM-A5-Safety-V01.indd 38 17-12-2020 14:35:15 17-12-2020 14:35:15