Convotherm mini OES 6.06, Руководство пользователя

Страница: 25 / 59

Cooking with the CONVOTHERM mini
- 26 -
EN
Regeneration
•
You can create dishes at quiet times
when not busy and arrange them on
plates or platters.
•
For banquets, you can regenerate
however many plates you need on
demand.
•
Large, compact pieces of foods such as
dumplings, roulades and oven bakes take
longer to regenerate than items such as
sliced meats, vegetable side dishes, rice
and quartered or diced potatoes.
•
The parts of the meal should be
distributed evenly over the plate in small
pieces. Avoid overlapping by large
amounts and arranging food to different
heights.
•
Place fish and meat on a base so that
it is evenly regenerated and does not
stick to the plate.
•
Meat should be pre-roasted to ‘rare’, if
it is to be cooked to ‘medium’ after
regeneration.
•
Vegetables, rice and pasta should be
buttered before regeneration.
Guide values for pre-heating temperatures, regeneration times and
regeneration temperatures when oven is fully loaded
(Regeneration times and temperatures are dependent on the number of plates to be regenerated)
CONVOTHERM
OES
Plate
capacity up to
32 cm dia. Pre-heating
temperature
with
convection Pre-heating
time Regeneration
temperature Regeneration
time
6.06
4 180°C 10 mins 120 – 130°C 4 - 8 mins
Reheating After the third regeneration, pre-heat again to the pre-heating
temperature.
Core temperature measurement
Measuring the core temperature is particularly recommended when cooking slow roasts and
when regenerating foodstuffs in GN containers.
1. Switch on using the button.
2. Insert the multi-point sensor through the
centre of the food item.
3. Select desired cooking programme
.
4. Press the button.
→
The oven
temperature will be called up in the
display. Set the required oven
temperature using the selector dial.
5. Press the button.
→
Set the desired
core temperature.
6. Press the
STOP
START
button
→
The selected
cooking programme will start. The
display will show the required oven
temperature and the actual core
temperature.
7. To alter the values set during operation,
press the