Manual CC 5201
9
Rear View
6.
OSD Setup Buttons
Set Button: Displays the menu on the screen. Press this button to confirm status or after
changing a selected item.
Up and Down Button: Used to move the cursor up and down in the menu screen to select a
desired menu item.
Left and Right Button: Used to move the cursor left or right in the menu screen or to change the
value of the selected item.
7.
D & N Input Port/GDN: Color, Open: B/W)
Switch to Day or Night Mode by connecting an external signal to this port.
8.
MD Output Port
Motion detection signal is output through this port.
9.
RS-485 Control Port
The SETUP MENU can be controlled via this port using an external controller that supports RS-
485 communications.
10.
Power LED
When power is properly connected, the LED illuminates.
11.
Video OUT Port
Video signals are output through this port. Connect this port to the Video IN port of a
Monitor/DVR.
12.
Auto Iris lens selection switch
Used to change between DC or Video depending upon the type of auto iris in use.
13.
Power IN Port
Connections for Camera power, as specified for each model.
