Manual CC 5201
11
4.
Fit the cover of the auto iris lens connector plug, remove the protective CCD cover from the
front of the camera and fasten the Auto Iris Lens by turning it clockwise.
5.
Focus the camera using the Auto Iris Lens controls, combined with fine adjustment using the
Back Focus control.
Using a C/CS mount Lens
Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount. This camera
is set for a CS-Mount Lens by default. To install a C-Mount Lens, a simple modification is required.
When Using a CS Mount Lens
Remove the protective cover from the front of this product and turn the
CS-Mount Lens clockwise to install it. Focus the camera using the
CS-Mount Lens and Back Focus controls.
Note
Use a lens threaded as shown in the following figure. If the dimensions of the thread are incorrect
the camera could be damaged, or the lens may not get installed firmly enough.
If the lens is too heavy the camera becomes unbalanced, which may cause problems. Use a lens
weighing less than 450g.
When adjusting the Automatic Level Control (ALC) of an Auto iris Lens, use Av mode if available. If
Pk mode is used the picture brightness may change continuously.
