Conviron GEN1000-GE, Руководство оператора

Страница: 22 / 54

GEN1000-GE Operator Manual
14 November 8 2019 | 291180-ENG R00
To install wire shelves:
Starting at the bottom of the chamber, install the shelf-support brackets (Figure 3-6) for the
appropriate number of shelves and to achieve the required shelf height.
1. Insert the angled top tab of the bracket into the pilaster at the required level.
2. Squeeze the bracket to align the bottom straight tab with the slot in the pilaster.
Correct Incorrect
Figure 3-6 Install the Shelf Support Brackets
Optimized lighting is based on the use of the Conviron seedling tray in the GEN1000-
GE chamber.
Light intensity in the chamber will vary according to the number of shelves installed
in the chamber; the use of Co
nviron’s optional trays, or trays from another
manufacturer, on the installed shelves; and the type and placement of the
germinating dishes used. Your results may vary from the stated light intensity values.
Ensure the shelf support brackets are firmly seated into the slots in the pilaster and
that the shelf support is level before installing the wire shelf.
Incorrectly installed shelf support brackets could cause the shelf to collapse.